Storefront Lock Repair
After an old lock is removed from the door, you will generally have to deal with some unsightly extra holes in the door. In most cases, the new door hardware won't cover these holes. Our Storefront Lock Repair kit is an aluminum door repair kit to help conceal those unsightly holes.
|
Snap In Bridge
Install new locks or replace stripped out lock mounting screws with GKL Bridges®. GKL storefront door modification Snap-In Bridges are installed in seconds with the special key. All it takes is a twist of the special key to snap the bridge® into an aluminum framed, narrow stile, storefront door. Done in about 10 seconds and ready to accept any lock deadbolt or dead latch, or simply use our spacers and custom blank faceplates to cover the cavity and get a clean professional looking door stile ready to accept a panic device, rim mount exit device or other hardware. Faceplates come in bronze and clear aluminum colors and in two different styles; beveled and rounded.
Installation Instructions
Brochure
|
 |
Spanner Key
Use this pocket-sized tool to install our new bridges and hole filler discs. A quick twist of the wrist does it.
Brochure
|
 |
ADD1
Discs are used as either a "Dummy" mortise or rim cylinder or to cover the cylinder and indicator holes in aluminum storefront doors. Use the ADD1 when you want to cover the openings and not have a through bolt joining the two covers.
Installation Instructions
Brochure
|
 |
ADD2
Discs are used as either a "Dummy" mortise or rim cylinder or to cover the cylinder and indicator holes in aluminum storefront doors. Use the ADD2 when you want to cover the openings and can use a through bolt joining the two covers. The spanner key makes this installation very simple.
Brochure
|
|
|
 |
|
Modify Door Locks 1
Modify Door Locks 2
Modify Door Locks 3
Starter Kit
|
|
|
|
|
